Victron VE Direct Cables Supply

Description
Various cables to communicate with Victron products that have a VE.Direct connection.
- The VE.Direct cable is used for communication between two devices with VE.Direct ports, for example a Victron Battery Monitor and Cerbo GX. Available in different lengths with versions with both straight and 90 degree angle connectors.
- The VE.Direct to USB cable allows VE.Direct devices to be connected to a PC for configuration with VictronConnect. It also allows you to connect large numbers of VE.Direct devices to a GX device via a USB hub.
- The VE.Direct to RS232 interface allows you to connect to a 9 Pin serial port.
- The VE.Direct TX digital output cable can be used in combination with the BlueSolar and SmartSolar MPPT chargers to enable a virtual load output and solar lighting applications.
- The VE.Direct non inverting remote on-off cable is used to switch the smaller BlueSolar and SmartSolar charge controller that do not have a dedicated remote on off terminal. Usually used alongside one of Victrons lithium battery BMS.
Additional Information
Name | VE Direct to Direct cable 0.3m, VE Direct to Direct cable 0.3m right angle one side, VE Direct to Direct cable 0.9m, VE Direct to Direct cable 0.9m right angle one side, VE Direct to Direct cable 1.8m, VE Direct to Direct cable 1.8m right angle one side, VE Direct to Direct cable 3.0m, VE Direct to Direct cable 3.0m right angle one side, VE Direct to Direct cable5.0m right angle one side, VE Direct to Direct cable 10m, VE Direct to Direct cable 10m right angle one side, VE Direct to USB interface 1.5m cable, VE Direct to RS232 interface, VE Direct TX digital output cable, VE Direct non inverting remote on-off cable |
---|